Glaxy Note 3 ( SM-N9005 ) Leaked Android 4.4.2 KitKat Test Firmware ( Note 3 အတြက္ KitKat -V 4.4.2 ထြက္ရွိလာ....)

မဂၤလာပါ....
Glaxy Note 3 ကိုင္ေဆာင္ထားၾကေသာမိတ္ေဆြမ်ားအတြက္ KitKat -V 4.4.2
ထြက္လာပါၿပီ ခင္ဗ်ာ.....။ အင္တာနက္ လိုင္း အေျခအေနေလးေတြေၾကာင့္
တိုက္ရိုက္လင့္ ပဲတင္ႏိုင္တာ နားလည္ေပး ၾကပါခင္ဗ်ာ....။
( ဖိုင္ေသးေသးေလးပါ...1.3GB မို႕...ဖုန္းႏွင့္ေတာ့ မေဒါင္းပါနဲ႕ေနာ...)
လိုအပ္ပါက......
Download Links     :  

DOWNLOAD HERE     ( 1.3 GB )

Odin 3 V  3.09 လိုအပ္ပါက ဒီေနရာေလးမွာ ယူပါ။

Model: SM-N9005
Country: Open Europe
Version: Android 4.4.2
Changelist: 340325
Build date: Thu, 9 Jan 2014 23:09:09 +0000
Product Code: OXX
PDA: N9005XXUENA6
CSC: N9005OXXENA5
MODEM: N9005XXUENA2


NOTE
- This test firmware WILL wipe your data. So, back it up!
- You are doing this at your OWN risk. We are not responsible if you brick your device or your cat eats your phone.
- This test firmware will NOT increase your binary counter NOR void your warranty.
- This test firmware is a pre-release build and not official from Samsung.
INSTRUCTIONS
- Extract (unzip) the firmware file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_N9005XXUENA2_REV03_CL1277177.tar.md5 to CP
- Add CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
အဆင္ေျပပါေစ..

ေမာင္ေပါက္< Knowledge Note >
www.maungpauk.org