Mobile Odin Pro v4.20 APK ကုိအသံုးျပဳၿပီး မိမိဖုန္းမွာ Official Firmware တင္မယ္ CWM Recovery သြင္းမယ္။သူ႔ကုိအသံုးျပဳၿပီးFirmware တင္ျခင္းအားျဖင့္ မိမိဖုန္းဟာRoot ကုိအလြယ္တကူေလးရရွိမွာျဖစ္ပါတယ္။



ဒီတစ္ခါေတာ့Mobile Odinဆုိတဲ့ Application ေလးနဲ႔မိတ္ဆက္ေပးခ်င္ပါတယ္။ ဒီ Application ေလးကေတာ္ေတာ္ေလးကုိအသံုးဝင္ပါတယ္။ သူ႔ကုိအသံုးျပဳဖုိ႔အတြက္မိမိဖုန္းဟာ Root လုပ္ၿပီးသားေတာ့ျဖစ္ရပါမယ္။ၿပီးေတာ့ မိမိဖုန္းဟာ Android O/S : 2.2 ႏွင့္အထက္ရွိရပါမယ္။မိမိမွာကြန္ပ်ဳတာမရွိတဲ့သူငယ္ခ်င္းေတြအတြက္အရမ္းကုိအဆင္ေျပေစမွာပါ။ဖုန္းနဲ႔ပဲ Firmware ကုိေဒါင္းၿပီးဖုန္းထဲမွာပဲFirmware ကုိအလြယ္တကူေလးတင္ႏူိင္မွာျဖစ္ပါတယ္။


Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.

! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !

If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!

Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.

Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.

From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.

Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.

Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.

Currently supported devices:

    Samsung Galaxy S GT-I9000/B/M
    Samsung Galaxy S GT-I9003/L
    AT&T/Rogers Captivate SGH-I896/I897

    Samsung Galaxy S2 GT-I9100/T/G/m
    Samsung Galaxy S2 SHW-M250S/K
    Samsung Galaxy S2 SC-02C
    AT&T Galaxy S2 SGH-I777
    Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST
    USCC Galaxy S2 SCH-R760

    Samsung Galaxy S3 GT-I9300/T
    Samsung Galaxy S3 GT-I9308
    AT&T/Canadia Galaxy S3 SGH-I747/M
    TMOUS Galaxy S3 SGH-T999
    Sprint/C-Spire Galaxy S3 SPH/SCH-L710
    VZW Galaxy S3 SCH-I535 (unlock bootloader !)
    USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C

    Samsung Galaxy S3 LTE SHV-E210S
    Samsung Galaxy S3 LTE GT-I9305/T/N

    Google Galaxy Nexus (GSM) Maguro/Yakju/GT-I9250
    Google Galaxy Nexus (CDMA/LTE) Toro/Mysid/SCH-I515 (no cdma radio flashing)

    Samsung Galaxy Note GT-N7000
    Samsung Galaxy Note GT-I9220
    Samsung Galaxy Note GT-N7000B

    Samsung Galaxy Note 2 GT-N7100
    Samsung Galaxy Note 2 LTE GT-N7105
    AT&T/Canadia Galaxy Note 2 SGH-I317/M
    TMOUS Galaxy Note 2 SGH-T889
    Sprint Galaxy Note 2 SPH-L900
    VZW Galaxy Note 2 SCH-I605 (unlock bootloader !)
    USCC Galaxy Note 2 SCH-R950

    Samsung Galaxy Note 10.1" GT-N8000
    Samsung Galaxy Note 10.1" Wi-Fi GT-N8010/N8013

    Samsung Galaxy Tab 7" GT-P1000
    Samsung Galaxy Tab 7.0 Plus GT-P6200/L, GT-P6210
    Samsung Galaxy Tab 7.7" GT-P6800, GT-P6810
    Samsung Galaxy Tab 10.1" GT-P7500, GT-P7510
    Samsung Galaxy Tab 2 7" GT-P3100, GT-P3110, GT-P3113
    Samsung Galaxy Tab 2 10" GT-P5100, GT-P5110, GT-P5113

    Samsung Galaxy 5 GT-I5500/B/L/T/M
    Samsung Galaxy 5 GT-I5503/T
    Samsung Galaxy 5 GT-I5508

Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.

မွတ္ခ်တ္—– အခုေနာက္ဆံုး Samsung Galaxy S4 ကုိပါအေထာက္အပံ့ေပးထားတယ္လုိသိရပါတယ္ခင္ဗ်။
အသံုးျပဳနည္း
==============

Reminders

  • Flashable .zip files are not supported in Mobile ODIN.(.Zip file ကုိအသံုးျပဳမရပါ)
  • Only files for Kernel, System, Data, Cache, Param, Modem, and Hidden files are supported(ေဖာ္ျပပါ ဖုိင္အမ်ဳိးအစားမ်ားကုိသာအသံုးျပဳႏူိင္ပါသည္။ တစ္နည္းအားျဖင့္  md5.tar ဖုိင္အမ်ဳိးအစားကုိသာအသံုးျပဳရပါမည္။)
  • Mobile ODIN does not flash PIT, IBL/PBL, SBL, and EFS(ဒီလုိဖုိင္အမ်ဳိးအစားေတြကုိ Flash လုပ္မရပါ)
  • After flashing official firmware, you will only get SuperSU. You may need to flash a separate CF-Root kernel to gain CWM Recovery and CWM Manager. You can flash CF-Root using Mobile ODIN like me :)(မုိဘုိင္းအုိဒင္းန္ ကုိအသံုးျပဳၿပီး Firmware Flash လုပ္ပါက Root ကုိ Auto(Super Su) ရရွိမွာျဖစ္ၿပီး .CWM Recovery ကုိေတာ့မိမိကုိယ္တုိင္ Mobile Odin ကုိအသံုးျပဳၿပီးတင္ႏူိင္ပါသည္)၀င္းလႈိင္(နည္းပညာ)
Mobile Odin Pro ကုိအသံုးျပဳၿပီး Firmware တင္တဲ့အခါမိမိဖုန္းရဲ႕ Binary Count အေရအတြက္ကလံုးဝကုိတုိးမလာပါဘူး။ၿပီးေတာ့ Yellow Triangle Sign လည္းမေပၚေတာ့ပါဘူး။

Step 1: Download the firmware

မိမိတင္မယ့္ Firmware ကုိေဒါင္းေလာ့လုပ္ၿပီး Firmware zip ကုိ extract လုပ္ၿပီး ရလာတဲ့ md5.tar ဖုိင္ကုိမိမိဖုန္းရဲ Internal or ႕External SD ကဒ္ထဲမွာထဲ့ေပးထားပါ။
(Firmware zip ဖုိင္ကုိေရြးေပးၿပီးတင္လည္းရပါတယ္ဒါေပမယ့္ mobile odin ကထပ္ၿပီးမိမိဖုန္းထဲမွာextract ထပ္လုပ္ေပးပါသည္)
ေအာက္ကပံုတြင္ေလ့လာလုိက္ပါ။
၀င္းလႈိင္(နည္းပညာ)
 —>>

Step 2:

Launch Mobile ODIN

မိမိဖုန္းတြင္ထဲ့သြင္းထားေသာ mobile odin pro အားဖြင့္ေပးလုိက္ပါ။ Super user access ေတာင္းလွ်င္ Grant လုပ္ေပးလုိက္ပါ။

Step 3

Select “Open file …”

ေအာက္ကပံုတြင္ေလ့လာလုိက္ပါ။
Open File ကုိႏွိပ္ေပးၿပီးမိမိအသံုးျပဳမယ့္ Extract လုပ္ၿပီးသား firmware file–>> md5.tar ဖုိင္ကုိေရြးေပးလုိက္ပါ.(မိမိရဲ႕Firmware ဟာ Full File ပါတဲ့ Firmware ျဖစ္ေနပါကလည္း Code လုိ. ေရးထားတဲ့ md5.tar ဖုိင္တစ္ခုတည္းကုိပဲေရြးေပးလုိက္ပါ)။comment box တစ္ခုေမးလာလွ်င္ OK ကုိႏွိပ္ေပးလုိက္ပါ။
 ၀င္းလႈိင္(နည္းပညာ)
တစ္ကယ္လုိ. မိမိေရြးေပးလုိက္တဲ့ firmware fileဟာမွားလားမွန္လားေသခ်ာေလးစစ္ေပးပါ။  မွားသြားတယ္ဆုိရင္လည္းစိတ္မပူပါနဲ႔။ Open File ရဲ႕ေအာက္က Clear All ကုိႏွိပ္ေပးလုိက္ပါ။

Step 4:

Make sure EverRoot is ticked (Pro users only)

EVER ROOT ရဲ႕ေအာက္ကျပထားတဲ့၃ ခု ကုိ အမွန္ျခစ္ေပးရပါမယ္။
  • Enable EverRoot
  • Inject Superuser
  • Inject Mobile ODIN
(ဒီအဆင့္မွာေတာ့ မိမိဟာ Official firmware ပဲသံုးမယ္ Root မလုပ္ျခင္ဘူးဆုိရင္ေတာ့ အထက္ပါ ၃ခုကုိအမွန္ျခစ္ေပးစရာမလုိပါဘူး။)
ေနာက္တဆင့္မွာေတာ့ Root လုပ္သည္ျဖစ္ေစ Root မလုပ္သည္ျဖစ္ေစ လုပ္ေဆာင္ရပါမယ္။
 ၀င္းလႈိင္(နည္းပညာ)

Select “Wipe data and cache” and “Wipe Dalvik cache”

FINAL STEP
အားလံုးမွန္သြားၿပီဆုိရင္ေတာ့
အခုေနာက္ဆံုးအဆင့္မွာ FLASH ရဲ႕ေအာက္က Flash Firmware ကုိႏွိပ္ေပးလုိက္ပါ။အဲ့လုိႏွိပ္ေပးလုိက္ရင္မိမိထဲ့ထားတဲ့ md5 ဖုိင္ကုိမွန္မမွန္စစ္ခုိင္းပါလုိက္မယ္။ကုိယ္ထဲ့ထားတာမွန္တယ္ဆုိရင္ေတာ့ SKIP ကုိႏွိပ္ၿပီးေက်ာ္သြားႏူိင္ပါတယ္။ စစ္ခ်င္တယ္ဆုိရင္ေတာ့ CHECK ကုိႏွိပ္ေပးလုိက္လွ်င္ေတာ့ဖုိင္ကုိစစ္ေပးၿပီးလွ်င္ဖုန္းကFirmware Flash လုပ္ရန္အတြက္Auto reboot က်သြားပါလုိက္မယ္။
ၿပီးလွ်င္အျပာေရာင္စက္ရုပ္ပံုေလးတက္လာပါမယ္။ ၿပီးလွ်င္ ေခတၱေစာင္. ေနလုိက္ပါ mobile odin က auto လုပ္ေဆာင္ေပးေနပါလိမ္. မယ္။အားလံုးၿပီးသြားလွ်င္ဖုန္းက လုိအပ္တဲ့ ဖုိင္ေတြကုိေအာ္တုိအင္စေတာလုပ္ေပးေနပါမယ္။Flashing Firmware ကိုသြင္းေနစဥ္မွာပဲမိမိဖုန္းကုိတစ္ခါတည္း Root ကုိပါလုပ္ေဆာင္ေပးမွာျဖစ္ပါတယ္။Auto Installing ၿပီးသြားလွ်င္ေတာ့မိမိဖုန္းေလးဟာ Firmware အသစ္ကေလးနဲ႔(Rooted)ပါရၿပီးလန္းေနပါၿပီ။
=======================================
Mobile Odin Pro ကုိအသံုးျပဳၿပီး CWM Recovery တင္မယ္
Cwm Recovery ဟာ .tar ဖုိင္ျဖစ္ရပါမယ္။ဖုိင္မွန္ၿပီဆုိလွ်င္ေတာ့ mobile odin pro ကုိဖြင့္ၿပီးလွ်င္ Kernel ကုိႏွိပ္ေပးလုိက္ၿပီး CWM Recovery .tar ဖုိင္ေလးကုိ ေရြးေပးလုိက္ပါ။ၿပီးလွ်င္ Flash Firmware ကုိႏွိပ္ေပးလုိက္ပါ။ ဖုန္းကAuto Reboot က်သြားၿပီးျပန္တက္လာပါလိမ္. မယ္။ ပံုမွန္အတုိင္းျပန္ျဖစ္သြားၿပီဆုိရင္ေတာ့။ မိမိဖုန္းကုိ vol up+home+power ကုိႏွိပ္ၿပီး Recovery Mode ကုိဝင္ၿပီးစစ္လုိက္ပါ။ Custom CWM Recovery ေလးသြင္းၿပီးသားျဖစ္ေနပါၿပီ။
အားလံုးအဆင္ေျပပါေစေနာ္

Post a Comment

  1. Samsung galaxy quattro i8552 သုံးလုိ႔မ၇ဘူးျဖစ္​​ေနတယ္​ နည္​းလမ္​း​ေလး​ေပးပါအုံး

    ReplyDelete

 
Top